Roll forming Information
Standing Seam
We manufacture Standing Seam in continuous lengths to achieve the ulitimate in water thightness panel intergriy. All seams are mechanically closed on-site to ensure permanent weather tightness. A finished seam of 1-1½" with variable width panels will provide the flexibility that is desired. The Standing Seam will feature a Kynar 500® or Hylar 5000™ finish, which carries a 20 year finish warranty.
Meets ASTM E 331 84 water penetration test with no evidence of uncontrolled leakage at 20psf pressure differential.
APPLICATIONS
 |
 |
RESIDENTIAL
ARCHITECTURAL
LIGHT COMMERCIAL / INDUSTRIAL
RETROFIT OVER EXISTING ROOF
GARAGES, PORCHES, GAZEBOS, ETC.
|
FEATURES
|
Seams height 1-1½", All seams mechanically closed, double or single lock, Concealed sliding or fixed clips, field rolled to exact lenghts, Standard widths: 12", 14", 16", 18", 20", Stiffener ribs (optional), Stiriation ribs (optional).
|
Materials
|
24ga galvanized - Kynar 500®, 24ga Galvalume® - Kynar 500®, .032 Aluminum - Kynar 500®, 24ga Galvalume Plus®, 16oz copper, 16oz lead coated copper.
|
Snap Locking
Metal roofing products of old had two drawbacks - standing seams were field-formed and panel attachment was through the roof deck, requiring screws, washers, sealant, and subsequent maintenance of these points of penetration. The field forming (folding and crimping) of the standing seams between panels was a tedious process and labor accounted for more than 80% of the installed price of the roof covering.
Some of this labor-intensivity has been eliminated with new cold-rolled steel roofing products. Panel edges have been designed with snap locking standing seams to accommodate a concealed fastener that saves installation and maintenance labor while enhancing the appearance and durability of the roofing product.
APPLICATIONS
|
 |
RESIDENTIAL
ARCHITECTURAL
LIGHT COMMERCIAL / INDUSTRIAL
RETROFIT OVER EXISTING ROOF
GARAGES, PORCHES, GAZEBOS, ETC.
|
FINISHES & COLORS
|
ALL GALVALUME, ALUMINUM, EMBOSSED, PAINTED AND GALVANIZED MATERIALS. GAUGE 24 TO 26 ASTM - A-792 STRUCTURAL STEEL GRADE 50 AND IN ANY COLOR INCLUDING KYNRE HYLAR 5000 PVDF, AND COPPER.
|
COLORS
|
ALL AVAILABLE
|
AVAILABILITY
|
IN ANY LENGTH ON JOB-SITE AND AVAILABLE IN ANY COIL WIDTH OF 16-24" STRIATIONS ARE OPTIONAL.
|
SLOPE
|
MINIMUM SLOPE REQUIREMENT IS 2-1/2"/12" PITCH. SLOPES LESS THAN 2-1/2"/12" PITCH MUST BE PRE-APPROVED.
|
FLASHING
|
ALL FLASHINGS ARE TO BE PRODUCED IN 24 & 26 GAUGE MATERIAL UNLESS OTHERWISE SPECIFIED.
|
SUBSTRATE
|
THE SNAP-LOK PANEL IS TO BE INSTALLED OVER SOLID DECKING & FOAM BOARD.
|
|
|
